DC/DC converter output contactor

The purpose of the DC/DC Converter Output Contactor is to connect and isolate the Traction Batteries or Fuel Cell from the DC/DC converter that supplies the entire vehicle. In the battery charger unit, you typically need a normally open, 2-pole contactor.

We offer a wide variety of designs to fit most installation requirements.

  • Compact size
  • High reliability
Image Image Image Image Image Image Image
Series
Size
Poles


LTHS
320
2NO

LTHS
400
2NO

LTHS
650
2NO

LTHS
800
2NO

LTHS
1250
2NO

LTHS
1500
2NO

LTHS
1700
2NO

Rated Operational Voltage
(up to)
[V] 1800 1800 1800 1800 1800 1800 1800
Thermal Current @ 75°C [A] 320 400 650 800 1200 1250 1600
Short Circuit Withstand Current for 5ms [kA] 8 10 12 12 16 16 16
DC
Rated Operational Current
(L/R=15 ms)
900 Vdc [A] 625 1400 3000 3000 4000 4000 2000
1800 Vdc [A] 290 500 1500 1500 2000 2000 1200
DC
Max Breaking Current
(L/R=5 ms)
900 Vdc [A] 830 2500 3500 3500 5000 5000 3400
1800 Vdc [A] 320 915 1750 1750 2500 2500 1700
Dimensions Length L [mm] 221 329 335 335 352 350 352
Width W [mm] 114 222 218 207 218 218 235
Height H [mm] 301 427 444 444 476 537 535
Weight [kg] 8.5 23 25.5 28 28 31 40