Battery Charger Input Contactor (Aux)

28 Jul

Battery charger input contactor (Aux)

The purpose of the Battery Charger Input Contactor is to connect and isolate DC/DC battery charger from DC Link. The operational conditions are like those of the APS input contactor, but with reduced lower load. Depending on the control logic, a disconnector can be used instead. In the battery charger unit, you typically need a single, normally open pole contactor.

We offer a wide variety of designs to fit most installation requirements.

  • High breaking capability
  • Suitable for heavy-duty mechanical operating conditions
  • Low current breaking capability
View LTC Series
View LTHS Series
View LTHH/LTE/LTP Series
View all Contactor's Series
Image Image Image Image Image Image Image Image Image Image Image
Series
Size
Poles


 LTCS
250
1NO

 LTCH
250
1NO

 LTCS
300
1NO

 LTCH
300
1NO

 LTHS
320
1NO

 LTCS
250
2NO

 LTCH
250
2NO

 LTCS
300
2NO

 LTCH
300
2NO

 LTHH
100
1NO

 LTHH
250
1NO
Rated Operational Voltage
(up to)		 [V] 1800 1800 1800 1800 1800 1800 1800 1800 1800 3600 3600
Thermal Current @ 75°C [A] 200 200 270 270 320 200 200 270 270 100 250
Short Circuit Withstand Current for 5ms [kA] 5 5 5 5 8 5 5 5 5 4 6
Fault Making Capacity [kA] 2.4 2.4 2.4 2.4 4.8 2.4 2.4 2.4 2.4 2.4 3.6
DC Rated Operational Current (L/R=15 ms) 900 Vdc [A] 65 100 65 100 300 205 300 205 300 460 900
1800 Vdc [A] 16 20 16 20 150 100 150 100 150 230 450
3600 Vdc [A] - - - - - - - - - 110 270
DC Max Breaking Current (L/R=5 ms) 900 Vdc [A] 130 150 130 150 750 415 500 415 500 500 1160
1800 Vdc [A] 25 30 25 30 275 200 250 200 250 250 580
3600 Vdc [A] - - - - - - - - - 125 350
Dimensions Length L [mm] 140 154 140 154 221 140 154 157 154 377 381
Width W [mm] 89 89 89 89 86 110 110 109 110 60 70
Height H [mm] 157 177 157 177 301 157 176 140 176 274 297
Weight [kg] 2 2.2 2 2.2 4.9 3.1 3.5 3.3 3.5 6.5 8.5