Auxiliary Power System Output Contactor

26 Jul

Auxiliary Power System Output contactor

The purpose of the Auxiliary Power System Output Contactor is to connect and isolate the auxiliary load, starting from APS. The operational conditions of the APS output contactor strongly depend on the type of connected load. Typically, AC loads require three or four pole contactors.

We offer a wide variety of designs to fit most installation requirements

  • Compact size
  • High reliability
View LTC Series
View LTHS Series
View all Contactor's Series
Image Image Image Image Image Image Image Image Image
SERIES
SIZE
POLES		 LTCS
250
3NO

 LTCH
250
3NO

 LTCS
300
3NO

 LTCH
300
3NO

 LTHS
320
3NO

 LTCS
250
4NO

 LTCH
250
4NO

 LTCS
300
4NO

 LTCH
300
4NO
Rated Insulation Voltage
(up to)		 [V] 2000 2000 2000 2000 2000 2000 2000 2000 2000
Thermal Current @ 75°C [A] 200 200 270 270 320 200 200 270 270
Short Circuit Withstand Current for 5ms [kA] 5 5 5 5 8 5 5 5 5
Fault Making Capacity [kA] 2.4 2.4 2.4 2.4 4.8 2.4 2.4 2.4 2.4
AC Rated Operational Current (cosphi = 0.8) 440 Vac [A] 130 200 130 200 - 130 200 130 200
AC Max Breaking Current (cosphi = 0.8) 440 Vac [A] 320 400 320 400 - 320 400 320 400
Dimensions Length L [mm] 140 154 140 140 221 140 154 140 154
Width W [mm] 166 166 166 166 172 220 220 220 220
Height H [mm] 156 176 156 176 311 157 176 157 176
Weight [kg] 4.7 5 4.7 5 11.2 6.5 6.5 6.5 6.5