Rectifier Breaker

Rectifier Breakers are used to supply the power needed by railway substations. They are installed on the circuit after rectifier and before the main Busbar (OMNIBUS). Depending on the applicable standards (IEC or ANSI), the rectifier breaker can be monostable or bistable. The monostable version is based on a holding coil system (IEC only), while the bistable version is based on a permanent magnet holding system (IEC) or a mechanical latch holding system (ANSI).

We offer a wide variety of designs fitting most installation requirements.

  • High electrical durability guaranteed with ceramic arc-chute and arcing contacts
  • High short circuit withstand capacity as required by ANSI Standard
View IR4000F Series
View all Breaker's Series
Image Image Image Image Image
Series
Size
Arc chute		 IR4000F
4030 | 4045
09M

 IR4000F
4060 | 4080
09M

 IR4000F
4030 | 4045
18MP

 IR4000F
4060 | 4080
18MP

 IR4000F
4030 | 4045
36MP
Rated Operational Voltage [Vdc] 900 900 1800 1800 3600
Thermal Current Ith(A)= @ 40°C [A] 3000/4500 6000 | 8000 3000 | 4500 6000 | 8000 3000 | 4500
Holding System Holding coil Holding coil Holding coil Holding coil Holding coil
Permanent Magnet Permanent Magnet Permanent Magnet Permanent Magnet Permanent Magnet
Rated Short-Circuit Current INss/TNC [kA/ms] 125/100 125/100 100/63 100/63 50/63
Duty F [kA/ms] 125/0
(peak 180kA)		 125/0
(peak 180kA)		 100/0
(peak 148kA)		 100/0
(peak 140kA)		 50/0
(peak 71kA)
Duty E [kA/ms] 62.5/50 62.5/50 50/31.5 50/31.5 35/31.5
Duty D [kA/ms] 8/100 16/100 8/63 16/63 8/63
Dimensions Length L [mm] 689 841 689 841 689
Width W [mm] 330 338 330 338 330
Height H [mm] 916 916 916 916 916
Weight [kg] 180 190 | 195 180 190 | 195 180